Equipment Setup



Camera and desktop stand
  1. Unpack "Desk Microphone Stand".  Screw the post into the base.
  2. Unpack the goosneck.  Screw it into the top of the "Desktop Microphone Stand".
  3. The camera adapter should already be attached to the top of the goosneck.
  4. Unpack the camera and screw it into to top of the stand and goosneck.
  5. Wind the camera cable around the stand a few times to keep it tidy.
  6. Plug the camera cable into an available USB port on your computer.
  7. Position the camera on the desk pointing towards where your visitors will be standing.
  8. Raise the camera to head height for better photography.
  Copyright 2014 Data Management, Inc.  All rights reserved.    |   Terms of Use     |     About Visitor Pass Solutions      |      Contact Us      |             Made in the USA
1.800.243.1969