Micron 520

Microcom 520/526 DT printer

1. Install labels into printer

a. Unpack printer and plug into power.

b. Load badges into the printer. They go face up.

2. Configure Windows

a. Plug the USB cord into the computer and load the driver.

b. For Threshold badges SKU=ZBT4-250

Page setup:

Preset: Default Settings

Click Apply

c. Feed a single label by pressing the button on the printer.

d. Note: If you can't reliably feed a single label, eVisitor will probably not be able to print.

e. Print a windows test page.

f. Note: If you can't reliably print a Windows test page, eVisitor will probably not be able to print.

3. Configure eVisitor

a. Login to eVisitor.

b. Goto settings, devices,

c. Reset printer to default

d. Point label printer to the "SNBC BTP-L526".

e. More Options: Photo Color: Print Color

f. Test by printing several badges.

If you are NOT using eVisitor, you may need to set:

a. Page Setup: Stock: 2 X 4, or as needed.

b. Page Setup: Orientation: Portrait

c. Adjust dithering: as desired

Printer Controls:

Reset: Press button while turning on, till beep.

Calibrate: Press button till 2 flashes

Print Config: Press button till 1 flash.

Resources

Microcom 520 User's guide